Model: Commander® Pistol Locker 2x3 with User Definable Combination Locks
Manufacturer: Precision Locker Company
181 Blackstone Avenue
Jamestown, NY 14701
Model No.: STL23-260430
Doors: 6
Weight: 60 lbs. (27.3 Kg.)
Application: 1) Weapons locker for law enforcement; 2) Pistol locker for semi-automatic pistols and revolvers.
General Description: Factory assembled steel locker with six (6) patron doors, welded construction, adjustable pistol holder in each compartment. Vertical configuration: 2-wide x 3-high. Pistols are stored upright on adjustable pistol holder.
Dimensions (W x D x H): 26-1/4” (666 mm) x 4-1/4” (108 mm) x 31-3/8” (775 mm)
Door Opening (W x H): 11-1/2” (292 mm) x 9” (229 mm)
Material: Cold rolled prime steel
Frame: 16 gauge
Doors: 16 gauge
Shelves, body: 18 gauge
Construction
Factory assembled; all welded, no protruding rivets, smooth outside surfaces; doors flanged with welded corners; shelves welded and secured to body; hinges continuous, concealed, welded to frame and bolted to door; pry protection bar conceals cam.
Locking System
User Definable Combination Locks (UDCL) which allow patrons to set and change their unique codes as often as they wish. Management key for emergency access.
Finish:
Powder coat paint finish; standard color combinations are 2-tone brown (bronze/sand) and 2-tone gray (charcoal/silver). Architectural samples are available.
Installation:
Wall mount is recommended; pre-punched mounting holes in rear of unit for securing to wall; pre-punched holes in sides for horizontal ganging; owner to provide fasteners, anchors, brackets and other hardware of type and size appropriate for type of substrate.