The Home Edition Pistol Cabinet (Key Lock) is a welded steel pistol cabinet with a single door and two interior compartments that will accommodate off duty weapons, personal handguns and ammunition. The locking mechanism will be a high security chrome plated brass key lock. Texture painted in two-tone, this pistol cabinet is designed to fit on shelf (or similar surface) and anchored to wall.

Dimensions (inches): 12 W x 8 D x 12 H

The unique high security key may be inserted in ANY POSITION -- up or down. Quick access, no fumbling in the dark.

For the hasp version, click here.

Model: Commander Pistol Locker 1x4 (Keyed)

Manufacturer: Precision Locker Company, 181 Blackstone Avenue, Jamestown, NY 14701

Model No: STL11-120812K

Doors: 1

Weight: 15 lbs (6.8 kg)

Application: 1) Home pistol cabinet

General Description: Factory assembled steel locker with one (1) patron door, welded construction, and foam padded shelves (2). Vertical configuration: 1-wide x 1-high.

Dimensions (W x D x H): 12” (305 mm) x 8” (203 mm) x 12' (305 mm)

Door Opening (W x H): 10-1/4” (260 mm) x 10 1/4" (260 mm)

Material: Cold rolled prime steel
Frame: 16 gauge
Doors: 16 gauge
Shelves/body: 18 gauge

Construction: Factory assembled; all welded, no protruding rivets, smooth outside surfaces; doors flanged with welded corners; shelves weld secured to body; hinges continuous, concealed, welded to frame and bolted to door; pry protection bar conceals cam.

Locking System: Two (2) keys per compartment; proprietary non-commercial key blank; non-duplicating patron key combinations; brass lock housing and cylinder; chrome plated finish; lock and key replacement or exchange by Precision Locker Company only.

Hasp Locks Available: cam action; chrome plated.

Finish: Powder coat paint finish; standard color combination is 2-tone gray. Architectural samples are available.

Installation: Wall mount is recommended; pre-drilled mounting holes in rear of unit for securing to wall; pre-drilled holes in sides for horizontal ganging; owner to provide fasteners, anchors, brackets and other hardware of type and size appropriate for type of substrate.