The Commander® 2x2 Pistol Locker is a desk mount handgun locker with pre-drilled holes for convenient vertical stacking or horizontal connection. As with its companion Commander® 1x4 pistol locker and our new 8-door pistol locker, this unit comes standard with brass key locks and non-duplicating patron key codes. All law enforcement weapons lie flat in four padded pistol locker storage compartments. Made in USA.
Standard High Security Key Lock
-
Chrome plated brass lock cylinder
-
Advanced pick resistance technology
-
Restricted key duplication
-
Two (2) keys and tags per lock
- Overall dimensions: 15-1/2" W x 12" D x 13-1/4" H
- Each door: 6-3/8" W x 5-3/8" H
- Weight: 26 lbs
Model: Commander Pistol Locker 2x2
Manufacturer: Precision Locker Company, 181 Blackstone Avenue, Jamestown, NY 14701
Model No: STL22-151213
Doors: 4
Weight: 26 lbs (11.8 Kg)
Application: 1) Weapons locker for law enforcement; 2) Pistol locker for semi-automatic pistols and revolvers.
General Description: Factory assembled steel locker with four (4) patron doors, welded construction, and foam padded compartments. Horizontal configuration: 2-wide x 2-high.
Dimensions (W x D x H): 15-1/2” (394 mm) x 12” (305 mm) x 13-1/8” (333 mm)
Door Opening (W x H): 6-3/8” (136 mm) x 5-3/8” (162 mm)
Material: Cold rolled prime steel
Frame: 16 gauge
Doors: 16 gauge
Shelves/Body: 18 gauge
Construction: Factory assembled; all welded, no protruding rivets, smooth outside surfaces; doors flanged with welded corners; shelves weld secured to body; hinges continuous, concealed, welded to frame and bolted to door; pry protection bar conceals cam.
Locking System: Two (2) keys per compartment; proprietary non-commercial key blank; non-duplicating patron key combinations; brass lock housing and cylinder; chrome plated finish; lock and key replacement or exchange by Precision Locker Company only.
Hasp Locks Available: cam action; chrome plated.
Finish: Powder coat paint finish; standard color combinations are 2-tone blue, 2-tone brown and 2-tone gray. Architectural samples are available.
Installation: Desk/counter/shelf mount is recommended; pre-drilled mounting holes in rear of unit for securing to wall; pre-drilled holes and concealed weld nuts allow for vertical stacking; owner to provide fasteners, anchors, brackets and other hardware of type and size appropriate for type of substrate.
|