The Commander® Keyless pistol locker is a high security law enforcement gun locker with four handgun storage compartments. This handgun locker has pre-drilled holes for easy side-to-side connection. All locks are user definable combo locks that allow users to set and change their own individual codes. All weapons lie flat on foam padded shelves. Standard key locks are also available with this right hinge model. Made in America.
-
Chrome plated combination lock
-
Users set their own codes
-
Users can freely change their codes
-
Two (2) control keys for management access
- Overall dimensions: 12"W x 8" D x 22 3/4" H
- Each door: 10 1/4" W x 5" H
- Compartment size: 11-3/4" W x 5" H x 7" D
- Weight: 25 lbs
Model: Commander Pistol Locker 1x4
Manufacturer: Precision Locker Company, 181 Blackstone Avenue, Jamestown, NY 14701
Model No: STL14-120823C
Doors: 4
Weight: 25 lbs (11.4 Kg)
Application: 1) Weapons locker for law enforcement; 2) Pistol locker for semi-automatic pistols and revolvers.
General Description: Factory assembled steel locker with four (4) patron doors, welded construction, and foam padded compartments. Vertical configuration: 1-wide x 4-high.
Dimensions (W x D x H): 12” (305 mm) x 8” (203 mm) x 22-3/4” (578 mm)
Door Opening (W x H): 10-1/4” (260 mm) x 5” (127 mm)
Material: Cold rolled prime steel
Frame: 16 gauge
Doors: 16 gauge
Shelves/Body: 18 gauge
Construction: Factory assembled; all welded, no protruding rivets, smooth outside surfaces; doors flanged with welded corners; shelves weld secured to body; hinges continuous, concealed, welded to frame and bolted to door; pry protection bar conceals cam.
Locking System: Keyless combo locks: User definable combination locks that allow users to freely set and change their own individual codes. Control key allows management to access any lock.
Standard Key Locks and Hasp Locks Available: cam action; chrome plated.
Finish: Powder coat paint finish; standard color combination is 2-tone gray (charcoal/silver). Architectural samples are available.
Installation: Wall mount is recommended; pre-drilled mounting holes in rear of unit for securing to wall; pre-drilled holes in sides for horizontal ganging; owner to provide fasteners, anchors, brackets and other hardware of type and size appropriate for type of substrate.
|