The Commander 1x4 pistol locker is a high security law enforcement gun locker with four handgun storage compartments. This handgun locker has pre-drilled holes for easy side-to-side connection. As with the Commander 2x2 pistol locker
, the standard locks have brass cores and non-duplicating patron key codes. All weapons lie flat on foam padded shelves. Made in USA.
Standard High Security Key Lock
Chrome plated brass lock cylinder
Advanced pick resistance technology
Restricted key duplication
Two (2) keys and tags per lock
- Overall dimensions: 12" W x 8" D x 22 3/4" H
- Each door: 10 1/4" W x 5" H
- Compartment size: 11-3/4" W x 5" H x 7" D
- Weight: 23 lbs.
Model: Commander Pistol Locker 1x4
Manufacturer: Precision Locker Company, 181 Blackstone Avenue, Jamestown, NY 14701
Model No: STL14-120823
Weight: 23 lbs (10.5 Kg)
Application: 1) Weapons locker for law enforcement; 2) Pistol locker for semi-automatic pistols and revolvers.
General Description: Factory assembled steel locker with four (4) patron doors, welded construction, and foam padded compartments. Vertical configuration: 1-wide x 4-high.
Dimensions (W x D x H): 12” (305 mm) x 8” (203 mm) x 22-3/4” (578 mm)
Door Opening (W x H): 10-1/4” (260 mm) x 5” (127 mm)
Material: Cold rolled prime steel
Frame: 16 gauge
Doors: 16 gauge
Shelves/body: 18 gauge
Construction: Factory assembled; all welded, no protruding rivets, smooth outside surfaces; doors flanged with welded corners; shelves weld secured to body; hinges continuous, concealed, welded to frame and bolted to door; pry protection bar conceals cam.
Locking System: Two (2) keys per compartment; proprietary non-commercial key blank; non-duplicating patron key combinations; brass lock housing and cylinder; chrome plated finish; lock and key replacement or exchange by Precision Locker Company only.
Hasp Locks Available: cam action; chrome plated.
Finish: Powder coat paint finish; standard color combinations are 2-tone blue, 2-tone brown (bronze/sand) and 2-tone gray (charcoal/silver). Architectural samples are available.
Installation: Wall mount is recommended; pre-drilled mounting holes in rear of unit for securing to wall; pre-drilled holes in sides for horizontal ganging; owner to provide fasteners, anchors, brackets and other hardware of type and size appropriate for type of substrate.