Twelve (12) patron door charging locker for cell phones and other mobile devices with a customized USB charging cable in each locker compartment. Vertical configuration is 2-wide x 6-high. The entire locker cabinet connects to a conventional 110V outlet. A concealed USB power strip with twelve ports enables charging in each compartment. Constructed of welded aluminum, no exposed rivets, smooth outside surfaces.
Model: Snapcharge™ Cell Phone Locker 2x6
Manufacturer: Precision Locker Company, 181 Blackstone Avenue, Jamestown, NY 14701
Model No: ALG26-260431
Doors: 12
Weight: 47 lbs
Application: 1) Secure charging of cell phones in locked compartments 2) Workplace solution for employee cell phones
General Description: Twelve (12) patron door charging locker for cell phones and other mobile devices with customized USB cable in each locked compartment. Vertical configuration is 2-wide x 6-high. Locker cabinet connects to conventional 110V outlet. A concealed USB power strip enables charging in each locker compartment. Max Load per 12 door unit = ~158 watts; Max From Mains: ~158 watts @ 120vac = ~1.3 amps; Each User Opening: 2.1 amps MAX @ 5vdc = 10.5 watts
Locker Dimensions (W x D x H): 26-1/4” (666 mm) x 4-5/8” (118 mm) x 31-1/2” (800 mm)
Compartment Dimensions (W x D x H): 11-1/2” (292 mm) x 3-7/8" (98mm) x 4" (102mm)
Material: Aluminum
Frame: 16 gauge
Doors: 16 gauge
Shelves/Body: 18 gauge
Construction: Factory assembled; all welded, no protruding rivets, smooth outside surfaces; doors flanged with welded corners; shelves welded and secured to body; hinges continuous, concealed, welded to frame and bolted to door; pry protection bar conceals cam.
Locking System: High security cam locks, non-duplicative codes, chrome plated brass, 2 keys per lock, master key system option. (User Definable Combination Locks also available.) Lock and key replacement or exchange by Precision Lock Company only.
Finish: Powder coat paint finish; standard color combinations are 2-tone brown (bronze/sand) and 2-tone gray (charcoal/silver). Architectural samples are available.
Installation: Wall mount is recommended; pre-punched mounting holes in rear of unit for securing to wall. Owner to provide fasteners, anchors, brackets and other hardware of type and size appropriate for type of substrate.
|